CarPro PolyShave Block View larger

CarPro PolyShave Block

New product

Simple and fast method to remove contaminants from paintwork and glass

More details

7 Items

€ 12.95 tax incl.

Add to wishlist

More info

Advanced Rubber Polymer Technology bonded to a 1" x 2" x 3 1/4" backing, gives you excellent control, eliminating the need for detailing clay. 

Decontamination of the paint surface is critical for a multitude of reasons.  It’s vital remove all contaminants before polishing so tiny contaminants are not dragged across the paint during the polishing phase.  Remove them first!  Then polish. Even if not polishing, it will ensure the surface is free of any contamination that will detract from the overall finish.

For years clay was the cornerstone of vehicle decontamination but now with Polyshave Towels or Blocks, removal of the above surface contaminants is not as time consuming.  Also unlike clay if you drop any Polyshave product, it can be rinsed off and still used!  With clay anytime it’s dropped it should be binned as dirt embeds into the clay.

Deep cleanse paint and glass in less time and with less effort than a traditional clay bar. Removes above surface paint, road grime, over spray, water spots, tree sap, and other bonded surface contaminants easily.  After use the surface will be clean, smooth, and free of all contaminants.


Precaution: Consider using a traditional claybar if you do not plan to polish afterwards, as the block can mar the surface



Advanced Rubber Polymer Technology

Quickly removes surface contaminants and leaves surface smooth to the touch

Re-useable: Simply rinse after use and re-use time and again

Replaces and is faster than claying

Lasts 5 times longer than clay


Size: 1" x 2" x 3 1/4"



Always wash vehicle before use of Polyshave or clay products

Important: Break in PolyShave block on the glass before use on paint

Keep surface well lubricated with your favourite clay lubricant

Do not use heavy pressure, simply glide across surface with block flat

Rinse often to maintain a clean working surface

Wipe off each section with Microfiber towel before moving to next


Deep Cleaning Tip: For deep cleaning the paint simultaneously use Iron X Paste as your lubricant. 



As with any mechanical decontamination products, polishing afterwards may be needed to remove micro marring

Store in closed container after use with polyshave side facing up with no contact of any other material pressing against it

Do not store in vehicle or allow to sit in sun or heat for extended periods

If you are new to these types of products check paint in direct lighting after one section to verify correct use.


Write a review

CarPro PolyShave Block

CarPro PolyShave Block

Simple and fast method to remove contaminants from paintwork and glass