CarPro ClearCUT

New product

Rapid Cutting Compound

More details

32 Items

€ 18.95 tax incl.

Add to wishlist

More info

For the past few years CarPro has been working towards creating a fast and heavy cutting compound, vastly more aggressive than any compound CarPro has produced before!  The result is.... CarPro ClearCut!

It is an extremely fast acting liquid abrasive, built from the ground up for efficiency, performance, and speed!  Unlike other popular compounds on the market ClearCut doesn't fool you by swelling the paint or hiding water spots and scratches just to see them re-surface later!  With NO fillers ClearCut wipes off fully and a simple Eraser wipe down, easily removes any lubricants.

 

Unlike compounds of the past, CarPro ClearCut has its own method of application for optimal results... reversing the traditional "heavy to light" method, we start with lighter pressure and finish heavy! It is also low dusting and wipes off with ease!  Say goodbye to hours of wasted time and hello to efficiency and less labour costs! 

 

Features:

Cuts FAST! Saves time

Zero Fillers, Low dusting

Removes P1000 grit and up

Body shop safe

Compatible with both Dual Action and Rotary machine

Compatible with a variety of foam, microfiber, and wool pads

 

Directions:

For Dual Action use:

Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product

Spread product across section

Raise speed to HIGH speed with LOW pressure

Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass

Increase pressure with each pass, finishing down with heavier pressure

When scratches are gone or polish has been worked through, wipe clean with microfiber towel

Clean pad

Move to next section -> Apply 6 - 8 pea size drops to pad and repeat steps 2-7.

 

For Rotary use:

Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product

Spread product across section

Keep polisher on low speed with LOW pressure

Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass

Increase pressure with each pass, finishing down again with low pressure

When scratches are gone or polish has been worked through, wipe clean with microfiber towel

Clean pad

Move to next section -> Apply 6 - 8 pea size drops to pad and repeat steps 2-7.

Tips:

Additional compound may be required with ClearCut than with traditional compounds.

Following with CarPro Reflect or Essence is recommended to achieve the ultimate gloss finish

Reviews

Write a review

  CarPro ClearCUT

CarPro ClearCUT

Rapid Cutting Compound